DSEAR

DSEAR

DSEAR Compliance Services

Exeltech Ltd covers the full range of DSEAR Compliance Services. If you are unsure what to do and how to proceed, we talk you through the steps to hazardous area compliance and advise you what you need to do to make your plant compliant.

It can be challenging to decide whom to partner when you are trying to achieve ATEX 137 or DSEAR site compliance. The most important factor when selecting a partner is ‘experience’ (in both your industry and DSEAR) and professional credibility. We can issue fully compliant the risk assessments, area classifications and inspection regimes of sites. We have been doing this for 20 years. We have an excellent record of accomplishment in achieving the statutory levels of safety within budget and with a minimum of disturbance to working processes.

Exeltech Ltd engineers help you determine the hazard level by guiding you through the formalities of Risk Assessment and Area Classification. Our engineers check that your plants suitably protected against ignition sources within hazardous areas. Our engineers also address any issues that may arise and offer remedial design solutions with an order of magnitude for rectification.

Exeltech Ltd can also advise on workplace training requirements and the establishment of an ongoing DSEAR Service Level Agreement to demonstrate continuing compliance. We also represent or support you in discussions with the HSE.

Exeltech Ltd engineers help you determine the hazard level by guiding you through the formalities of Risk Assessment and Area Classification. Our engineers check that your plants suitably protected against ignition sources within hazardous areas. Our engineers also address any issues that may arise and offer remedial design solutions with an order of magnitude for rectification.

Exeltech Ltd can also advise on workplace training requirements and the establishment of an ongoing DSEAR Service Level Agreement to demonstrate continuing compliance. We also represent or support you in discussions with the HSE.

The DSEAR Services offered by Exeltech Ltd aim to ensure that you achieve and demonstrate compliance with the relevant DSEAR, ACOPs, ISO 80079 and BS EN 60079 requirements. We do this most expeditiously by providing practical advice and support so that you do not have a list of further problems to rectify. Subsequently, you can face up to any regulatory scrutiny with confidence.
The DSEAR Services offered by Exeltech Ltd aim to ensure that you achieve and demonstrate compliance with the relevant DSEAR, ACOPs, ISO 80079 and BS EN 60079 requirements. We do this most expeditiously by providing practical advice and support so that you do not have a list of further problems to rectify. Subsequently, you can face up to any regulatory scrutiny with confidence.

DSEAR Site Audit

Exeltech Ltd offers a DSEAR Site Audit service. The first step to achieving compliance is to review for gaps if any. Assessing your current level and the standard set by DSEAR. We provide you with an overview of your present status and explain how you can address any areas of concern.

The audit takes the form of a formal step-by-step review of your installation, policies, and procedures against the provisions imposed by the DSEAR standard we use ACOP 138 as a guild for this. An engineer leads the review, and any findings are reported to you in terms of practical recommendations that point the way to full compliance.

We undertake this service wherever DSEAR applies, in new builds, at existing sites that are still not compliant, and following plant modifications.

It is paramount to get your DSEAR right. Overdoing it can be unnecessarily costly; doing too little can turn out to be even more so. We offer an independent audit that is straightforward and authoritative, and one that promises a constructive route to compliance right from the outset.

DSEAR Site Audit

Exeltech Ltd offers a DSEAR Site Audit service. The first step to achieving compliance is to review for gaps if any. Assessing your current level and the standard set by DSEAR. We provide you with an overview of your present status and explain how you can address any areas of concern.

The audit takes the form of a formal step-by-step review of your installation, policies, and procedures against the provisions imposed by the DSEAR standard we use ACOP 138 as a guild for this. An engineer leads the review, and any findings are reported to you in terms of practical recommendations that point the way to full compliance.

We undertake this service wherever DSEAR applies, in new builds, at existing sites that are still not compliant, and following plant modifications.

It is paramount to get your DSEAR right. Overdoing it can be unnecessarily costly; doing too little can turn out to be even more so. We offer an independent audit that is straightforward and authoritative, and one that promises a constructive route to compliance right from the outset.

Start typing and press Enter to search

Shopping Cart